Tripp Lite UPS Smart 1000VA 750W Tower Hospital Medical AVR 120V USB DB9 (SMART1200XLHG) specs.
Uninterruptible Power Supplies Specs >> Tripp >> Tripp Lite UPS Smart 1000VA 750W Tower Hospital Medical AVR 120V USB DB9 (SMART1200XLHG)
Technical Information Tripp Lite UPS Smart 1000VA 750W Tower Hospital Medical AVR 120V USB DB9 (SMART1200XLHG)
Plug/Connector Type:
NEMA 5-15P
Receptacles:
4 x NEMA 5-15R
Cord Length:
6 ft
Transfer Time:
4 ms
Power Description Tripp Lite UPS Smart 1000VA 750W Tower Hospital Medical AVR 120V USB DB9 (SMART1200XLHG)
Load Capacity:
1 kVA/750 W
Input Voltage:
120 V AC
Output Voltage:
115 V AC 120 V AC
Management Tripp Lite UPS Smart 1000VA 750W Tower Hospital Medical AVR 120V USB DB9 (SMART1200XLHG)
Network Management:
SNMP Manageable
Alarm:
On Battery Overload Low Battery
Controls/Indicators Tripp Lite UPS Smart 1000VA 750W Tower Hospital Medical AVR 120V USB DB9 (SMART1200XLHG)
Status Indicators:
Includes 5 front-panel indicator LEDs to show battery charge level, AC line voltage levels, automatic voltage regulation status, UPS load level and replace battery warning
Interfaces/Ports Tripp Lite UPS Smart 1000VA 750W Tower Hospital Medical AVR 120V USB DB9 (SMART1200XLHG)
USB:
Universal Serial BusYes
Battery Information Tripp Lite UPS Smart 1000VA 750W Tower Hospital Medical AVR 120V USB DB9 (SMART1200XLHG)
Battery Chemistry:
Sealed Lead Acid (SLA)
Backup/Run Time (Full Load):
10 Minute
Backup/Run Time (Half Load):
28 Minute
Battery Life:
6 Year
Typical Battery Recharge Time:
4 Hour
Hot Swappable:
Yes
Environmental Conditions Tripp Lite UPS Smart 1000VA 750W Tower Hospital Medical AVR 120V USB DB9 (SMART1200XLHG)
Maximum Operating Temperature:
104°F (40°C)
Design Tripp Lite UPS Smart 1000VA 750W Tower Hospital Medical AVR 120V USB DB9 (SMART1200XLHG)
Height:
12.75" (323.85 mm)
Width:
7.50" (190.50 mm)
Depth:
9" (228.60 mm)
Form Factor:
Tower
Weight:
20.23 kg
Miscellaneous Tripp Lite UPS Smart 1000VA 750W Tower Hospital Medical AVR 120V USB DB9 (SMART1200XLHG)
Additional Information:
Ideal UPS protection for applications in medical patient-care areas where UL 2601-1 listed medical electrical equipment is required
Maintains less than 300 microamps leakage current for UPS and all connected equipment
Built-in isolation transformer with faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes
Provides connected equipment with continuous power during short and long duration loss of commercial power
Expandable runtime is available with the addition of one or more external battery packs (part# BP36V27)
Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power
Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections
Full line isolation prevents shock potential and operational problems in sensitive electronic equipment
Resistant to electrostatic discharge
Supports loads up to 1000VA / 750 watts
34 minutes half load runtime (500VA/375 watts), 16 minutes full load runtime (1000VA/750 watts)
4 protected hospital-grade outlets; 6-ft. cord
1-RS-232 and 1-USB serial port for network interface; SNMP compatible
SNMP compatible with separate purchase SNMPWEBSOLO ethernet adapter accessory
Complete surge protection, line isolation and EMI/RFI noise filtering
2 year product warranty
PowerAlert unattended shutdown software and complete cabling included
5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace
Battery replacement door
Back panel grounding lug
Certifications & Standards:
UL1778 (USA, Series AGSM1200PSR3HG), UL2601-1 (Medical), cUL (Canada), FCC Class A (emissions), Conforms to IEEE 587 / ANSI C62.41 specifications
Reviews, Questions about Tripp Lite UPS Smart 1000VA 750W Tower Hospital Medical AVR 120V USB DB9 (SMART1200XLHG)
Write Review / Ask a question about Tripp Lite UPS Smart 1000VA 750W Tower Hospital Medical AVR 120V USB DB9 (SMART1200XLHG)