PowerWalker VFI 10000 CRM LCD specs.
Uninterruptible Power Supplies Specs >> Powerwalker >> PowerWalker VFI 10000 CRM LCD| Specifications | | | Reviews |
Technical Characteristics PowerWalker VFI 10000 CRM LCD
Type:
double Conversion
Rackable:
yes
Output power PowerWalker VFI 10000 CRM LCD
Full:
10000 VA
Active:
8000 W
Working hours PowerWalker VFI 10000 CRM LCD
Full load:
3 min
Half load:
10 min
Output Waveform:
sinusoid
Efficiency:
91 %
Nonlinear distortion factor:
3 %
Input / Output PowerWalker VFI 10000 CRM LCD
Voltage PowerWalker VFI 10000 CRM LCD
Input:
1-phase
Output:
1-phase
The number of output power connectors PowerWalker VFI 10000 CRM LCD
Total:
1
UPS:
1
Input voltage PowerWalker VFI 10000 CRM LCD
Minimum:
110 V
Maximum:
300 V
Input frequency PowerWalker VFI 10000 CRM LCD
Minimum:
46 Hz
Maximum:
64 Hz
Crest factor:
3
The stability of the output voltage (battery mode):
1 %
Functions PowerWalker VFI 10000 CRM LCD
Information Display:
LCD Screen
Audible alarm:
yes
Cold start:
yes
By-pass PowerWalker VFI 10000 CRM LCD
Manual:
yes
Automatic:
yes
Interfaces PowerWalker VFI 10000 CRM LCD
USB:
Universal Serial Bus
Universal Serial Busyes
RS-232:
yes
Ethernet 10/100:
no
Slot for optional interfaces:
yes
Dry contacts:
no
SNMP Support:
no
Protection PowerWalker VFI 10000 CRM LCD
Overload protection:
yes
Protection from high-voltage pulses:
yes
Noise Filtering:
yes
Short-circuit protection:
yes
Phone line protection:
no
Protecting the local network:
no
Protect the antenna cable:
no
Galvanic isolation:
no
Supply PowerWalker VFI 10000 CRM LCD
Charging time:
4 h
Battery replacement:
yes
Hot-swappable batteries:
no
Connecting additional battery:
yes
Additional information PowerWalker VFI 10000 CRM LCD
Noise level:
58 dB
Height (in units):
3 U
Height:
133 mm
Width:
438 mm
Depth:
580 mm
Weight:
18 kg
Colour:
black
Reviews, Questions about PowerWalker VFI 10000 CRM LCD
Write Review / Ask a question about PowerWalker VFI 10000 CRM LCD
