Powercom RPT-2000AP specs.
Uninterruptible Power Supplies Specs >> Powercom >> Powercom RPT-2000AP| Specifications | | | Reviews |
iv>
Technical Characteristics Powercom RPT-2000AP
Type:
interactive
Rackable:
no
Output power Powercom RPT-2000AP
Full:
2000 VA
Active:
1200 W
Output Waveform:
sine wave approximation
Switching time on battery:
4 ms
Input / Output Powercom RPT-2000AP
Voltage Powercom RPT-2000AP
Input:
1-phase
Output:
1-phase
The number of output power connectors Powercom RPT-2000AP
Total:
6
UPS:
6
Type:
IEC 320 C13 (computer)
Input voltage Powercom RPT-2000AP
Minimum:
165 V
Maximum:
300 V
Input frequency Powercom RPT-2000AP
Minimum:
45 Hz
Maximum:
65 Hz
The stability of the output voltage (battery mode):
5 %
Functions Powercom RPT-2000AP
Information Display:
LEDs
Audible alarm:
yes
Cold start:
yes
By-pass Powercom RPT-2000AP
Manual:
no
Automatic:
no
Interfaces Powercom RPT-2000AP
USB:
Universal Serial Bus
Universal Serial Busyes
RS-232:
no
Ethernet 10/100:
no
Slot for optional interfaces:
no
Dry contacts:
no
SNMP Support:
no
Protection Powercom RPT-2000AP
Overload protection:
yes
Protection from high-voltage pulses:
yes
Noise Filtering:
yes
Short-circuit protection:
yes
Phone line protection:
yes
Protecting the local network:
yes
Protect the antenna cable:
no
Galvanic isolation:
no
Supply Powercom RPT-2000AP
Charging time:
4 h
Battery replacement:
yes
Hot-swappable batteries:
no
Connecting additional battery:
no
Additional information Powercom RPT-2000AP
Noise level:
40 dB
Height:
164 mm
Width:
146 mm
Depth:
360 mm
Weight:
11.1 kg
Colour:
black
Reviews, Questions about Powercom RPT-2000AP
Write Review / Ask a question about Powercom RPT-2000AP
