Mobiles     Laptops     Tablets     Computers     Hardware  Components       Electronics

Cisco AIR-SAP2602I specs.

  Routers Specs >> Cisco >> Cisco AIR-SAP2602I
Specifications | Reviews


General characteristics Cisco AIR-SAP2602I
Type of connection:
Wi-Fi
Device type:
access point
Built-in support for 3G (UMTS):
No
Built-in support for WiMAX:
No
Built-in support for LTE:
No
Built-in support for LTE Advanced:
No
ADSL2+:
No
WiFi Technology:
802.11n
The frequency range of the device Wi-Fi:
2.4 / 5 GHz
Work in two bands simultaneously:
No
Max. the wireless connection speed:
450 Mbit/s
MIMO:?Multiple Input Multiple Output
Yes
Support IEEE 802.1q (VLAN):
No
Support IPv6:
No
Autonomy:
No
Options access point / bridge Cisco AIR-SAP2602I
Web-server:
No
File server:
No
FTP-server:
No
UPnP AV-server:
No
Number of Ethernet Ports:
1
Speed:
1000 Mbit/sec
Guest network:
No
Bridge mode:
No
Repeater mode:
No
Download file:
No
Connect web-camera:
No
VPN Cisco AIR-SAP2602I
VPN (VPN pass through):
No
VPN-tunnels (VPN Endpoint):
No
VoIP Cisco AIR-SAP2602I
Built-in VoIP-adapter:
No
Port Lifeline:
No
Router Cisco AIR-SAP2602I
Router:
No
Built-in firewall:
No
NAT:?Network Address Translation
No
SPI:?Serial Peripheral Interface
No
WDS:?Wireless Distribution System
No
DHCP-server:?Dynamic Host Configuration Protocol
No
Dynamic DNS:?Dynamic Domain Name System
No
Demilitarized zone (DMZ):
No
Static routing:
No
Dynamic Routing Protocols Cisco AIR-SAP2602I
IGMP v1:
No
IGMP v2:
No
RIP v1:
No
RIP v2:
No
Monitoring and Configuring Cisco AIR-SAP2602I
Console port:
Yes
Web-based interface:
Yes
Telnet:
No
SNMP:
No
Internal antenna Cisco AIR-SAP2602I
Number:
2
Gain:
4 dBi
Memory Cisco AIR-SAP2602I
RAM Memory:
256 Má
Flash memory:
32 Má
Reception / Transmission Cisco AIR-SAP2602I
Data encryption Cisco AIR-SAP2602I
WEP:?Wired Equivalent Privacy
No
WPA:?Wi-Fi Protected Access
Yes
WPA2:
Yes
802.1x:
Yes
Power transmitter:
23 dBM
Additional information Cisco AIR-SAP2602I
Power over Ethernet:
Yes
Outdoor Installation:
No
Connectivity of 3G-modem:
No
Connectivity WiMAX-modem:
No
Ability to connect LTE-modem:
No
Dimensions Cisco AIR-SAP2602I
Depth:
221 mm
Width:
221 mm
Height:
54 mm
Weight:
1040 g


Reviews, Questions about Cisco AIR-SAP2602I




Write Review / Ask a question about Cisco AIR-SAP2602I
 
  
      2+5= *


Popular today


Huawei B310
Huawei B310
Type of connection: Wi-Fi; Device type: access point; Built-in support for 3G (UMTS): Yes; Built-in support for WiMAX: No; Built-in support for LTE: Yes; Built-in support for LTE Advanced: No; ADSL2+:...
ZTE MF283
ZTE MF283
Type of connection: Wi-Fi; Device type: access point; Built-in support for 3G (UMTS): Yes; Built-in support for WiMAX: No; Built-in support for LTE: Yes; Built-in support for LTE Advanced: No; ADSL2+:...


Cisco AIR-SAP2602I

news
 TP-Link has released a router with Wi-Fi 7 for $99

TP-Link has unveiled two new routers with Wi-Fi 7 support and Mesh networking capabilities. The entry-level Archer BE220 for $99 gets gigabit LAN ports and decent bandwidth, while the more advanced Archer BE7200 is geared toward higher networking loads.



news
 TP-Link introduces new BE7200 router with Wi-Fi 7

TP-Link has unveiled its latest router, the BE7200, which boasts support for the latest Wi-Fi 7 standard. This means lightning-fast theoretical speeds, a significant upgrade over previous generations. The BE7200 also has excellent wired connectivity. Equipped with five 2.5G network ports, it is suitable for devices that require high bandwidth, such as NAS drives, AR/VR consoles, and 8K video streaming. These ports can even be combined for a total speed of up to 5Gbps.