Phones    Laptops    Computers & Tablets    Electronics     Car Electronics    Hardware Components  

Thermaltake LT-450AL2NL-1 (W0416) 450W - Power Supplies specifications.

  Power Supplies Specs >> Thermaltake >> Thermaltake LT-450AL2NL-1 (W0416) 450W


General characteristics Thermaltake LT-450AL2NL-1 (W0416) 450W
Power:
450 W
PFC: Power Factor Correction is a technique that promotes efficient energy consumption from the power grid. Power Factor correction is employed inside common electrical and electronic equipment that are powered from the AC outlet. Power factor correction enables the equipment to maximize the active power draw and minimize the reactive power draw from the AC outlet.
no
Cooling system:
1 fan (120 mm)
Connectors Thermaltake LT-450AL2NL-1 (W0416) 450W
A type of connector for the motherboard:
20+4 pin
The number of connectors 4+4 pin CPU:
1
The number of connectors 6-pin PCI-E:
1
The number of connectors 6+2-pin PCI-E:
1
The number of connectors 15-pin SATA:
4
The number of connectors 4-pin IDE:
4
The number of connectors 4-pin Floppy:
1
Current strength Thermaltake LT-450AL2NL-1 (W0416) 450W
The current line +3.3 V:
20 A
The current line +5 V:
20 A
The current line +12 V 1:
33 A
The current line-12 V:
0.3 A
The current line +5 V Standby:
2.5 A
Additional information Thermaltake LT-450AL2NL-1 (W0416) 450W
Overvoltage protection: OVP circuits can be fixed or tracking and local or remote. A fixed OVP makes it possible to set a fixed voltage threshold, either manually or programmed remotely. It's a fixed value such that when the power-supply output voltage exceeds this value, the OVP circuit trips and the power supply tries to pull down the overvoltage on its output. The power supply output voltage can be changed, and the OVP threshold stays the same.
yes
Overload protection: Overload protection is a protection against a running overcurrent that would cause overheating of the protected equipment. Hence, an overload is also type of overcurrent. Overload protection typically operates on an inverse time curve where the tripping time becomes less as the current increases. Overload relays as well as “slow blow” fuses are commonly used to provide overload protection.
yes
Protection against short circuit:
yes
Dimensions (HxWxD):
86x150x140 mm

Comments, questions and answers to Thermaltake LT-450AL2NL-1 (W0416) 450W




Ask a question about Thermaltake LT-450AL2NL-1 (W0416) 450W
Name: 
Question: 
  
      5+8= *Enter the sum of the two numbers.


Popular today


Chieftec DSI200P 200W
Chieftec DSI200P 200W
Power: 200 W; Standard: ATX12V 2.3; PFC: active; Cooling system: 1 fan (80 mm); Type of connector for the motherboard: 20+4 pin; Number of connectors 4-pin CPU: 1; Number of connectors 15-pin SATA: 2; Number of connectors 4-pin IDE: 2; Current for the +3.3 V: 14 A; Current on The +5 V: 14 A; The cur...
HIGH POWER HPC-420-302 DF 420W
HIGH POWER HPC-420-302 DF 420W
Power: 420 W; Standard: ATX12V 2.0; PFC: active; Cooling system: 2 fan; Type of connector for the motherboard: 20+4 pin; Number of connectors 4-pin CPU: 1; Number of connectors 6-pin PCI-E: 1; Number of connectors 15-pin SATA: 2; Number of connectors 4-pin IDE: 9; Number of connectors 4-pin Floppy: ...

Related news

Corsair RM550x - silent and performance
The lowest-capacity unit Corsair's RMx line outputs up to 550W and is 80 PLUS Gold-certified. It features fully modular cabling, offers great performance and is nearly silent throughout its operating range, too.

Bitfenix BF450G - very good power supply
The BitFenix BF450G is a very good power supply, no doubt about that. It offers tight load regulation on all of its rails, it is highly efficient, incredibly quiet, and its ripple suppression is pretty good. Although this PSU lacks a semi-passive mode and uses a smaller 120mm fan, it's still one of the quietest models we've ever tested. Channel Well Technology and BitFenix did a very good job designing the BF450G, earning this platform a top place in its efficiency class (80 PLUS Gold and ETA-A).