iNew I3000 - Specification, Features.
Phones Specs >> iNew >> iNew I3000| Specification | | | Reviews | | | Secret codes | | | Unlock | | | Root |
Body iNew I3000
Size:
71.0 mm x 140.0 mm x 9.0 mm
Weight:
125 g
Frame size:
0.32 mm
Usable surface:
68 %
Diagonal:
Screen size detect physical dimensions of your display in inches.
Screen size detect physical dimensions of your display in inches.5"
Screen Type:
LCD IPS
Screen Resolution:The display resolution or display modes of a digital television, computer monitor or display device is the number of distinct pixels in each dimension that can be displayed. It can be an ambiguous term especially as the displayed resolution is controlled by different factors in cathode ray tube (CRT), flat-panel display which includes liquid-crystal displays, or projection displays using fixed picture-element (pixel) arrays.
The display resolution or display modes of a digital television, computer monitor or display device is the number of distinct pixels in each dimension that can be displayed. It can be an ambiguous term especially as the displayed resolution is controlled by different factors in cathode ray tube (CRT), flat-panel display which includes liquid-crystal displays, or projection displays using fixed picture-element (pixel) arrays.720 x 1280 px
Density:
Medium Density, 294 Pixels per inch differentiable less than 40 cm away,
Others:
Capacitive, Multi-touch
Software iNew I3000
Operating System:
Android 4.2.1 Jelly Bean
Performance iNew I3000
Model:
MediaTek MT6589
CPU:A mobile processor is found in mobile computers and cellphones. A CPU chip is designed for portable computers, it is typically housed in a smaller chip package, but more importantly, in order to run cooler, it uses lower voltages than its desktop counterpart and has more "sleep mode" capability. A mobile processor can be throttled down to different power levels or sections of the chip can be turned off entirely when not in use. Further, the clock frequency may be stepped down under low processor loads. This stepping down conserves power and prolongs battery life.
A mobile processor is found in mobile computers and cellphones. A CPU chip is designed for portable computers, it is typically housed in a smaller chip package, but more importantly, in order to run cooler, it uses lower voltages than its desktop counterpart and has more "sleep mode" capability. A mobile processor can be throttled down to different power levels or sections of the chip can be turned off entirely when not in use. Further, the clock frequency may be stepped down under low processor loads. This stepping down conserves power and prolongs battery life.ARM Cortex-A7
Type:
Quad-Core
Frequency:Processor frequency specifies the operating (internal) frequency of CPU core. The higher the frequency is for a given CPU family, the faster the processor is. Processor frequency is not the only parameter that affects system performance. Another parameter than greatly affects the performance is CPU efficiency, that is how many Instructions Per Clock (IPC) the CPU can process. Knowing these two parameters it is easy to calculate total number of instructions per second.
Processor frequency specifies the operating (internal) frequency of CPU core. The higher the frequency is for a given CPU family, the faster the processor is. Processor frequency is not the only parameter that affects system performance. Another parameter than greatly affects the performance is CPU efficiency, that is how many Instructions Per Clock (IPC) the CPU can process. Knowing these two parameters it is easy to calculate total number of instructions per second.1.2 GHz
GPU:
PowerVR SGX544
RAM:Random-access memory (RAM) is a form of computer data storage. A random-access memory device allows data items to be accessed (read or written) in almost the same amount of time irrespective of the physical location of data inside the memory.
Random-access memory (RAM) is a form of computer data storage. A random-access memory device allows data items to be accessed (read or written) in almost the same amount of time irrespective of the physical location of data inside the memory.1 GB
Antutu score:AnTuTu is one of the most popular benchmark apps for Android devices. It tests many parts of your device and assigns an overall score. Here's what AnTuTu is actually measuring and what each benchmark means for real-world use.
AnTuTu is one of the most popular benchmark apps for Android devices. It tests many parts of your device and assigns an overall score. Here's what AnTuTu is actually measuring and what each benchmark means for real-world use.12.345 Overall performance better than 8% of smartphones
Capacity:
4 GB (Capacity with the OS (depends on the brand and ROM version): 2-3 GB)
More or less equivalent to:
727 Songs, 1600 Photos and 57 Videos
SD Slot:
Yes Independent SD slot
Special Features iNew I3000
Fingerprint:
No
Accelerometer:An accelerometer is a device that measures changes in gravitational acceleration in a device it may be installed in. Accelerometers are used to measure acceleration, tilt and vibration in numerous devices. At rest, an accelerometer measures 1g: the earth is gravitational pull, which registers 9.81 meters per second or 32.185 feet per second. Accelerometers that use the piezoelectric effect measure a small voltage change. Others measure capactitance between two components.
An accelerometer is a device that measures changes in gravitational acceleration in a device it may be installed in. Accelerometers are used to measure acceleration, tilt and vibration in numerous devices. At rest, an accelerometer measures 1g: the earth is gravitational pull, which registers 9.81 meters per second or 32.185 feet per second. Accelerometers that use the piezoelectric effect measure a small voltage change. Others measure capactitance between two components. Yes
Gravity:
Yes
Light sensor:A Light Sensor is something that a robot can use to detect the current ambient light level - i.e. how bright/dark it is. There are a range of different types of light sensors, including Photoresistors, Photodiodes, and Phototransistors. The sensor included in the BOE Shield-Bot kit, and the one we will be using, is called a Phototransistor.
A Light Sensor is something that a robot can use to detect the current ambient light level - i.e. how bright/dark it is. There are a range of different types of light sensors, including Photoresistors, Photodiodes, and Phototransistors. The sensor included in the BOE Shield-Bot kit, and the one we will be using, is called a Phototransistor.Yes
Proximity:
Yes
Camera iNew I3000
Resolution:
8 Mpx
Sensor:
Type:
Aperture:Simply put, aperture is a hole within a lens, through which light travels into the camera body. It is easier to understand the concept if you just think about our eyes. Every camera that we know of today is designed like human eyes. The cornea in our eyes is like the front element of a lens - it gathers all external light, then bends it and passes it to the iris. Depending on the amount of light, the iris can either expand or shrink, controlling the size of the pupil, which is a hole that lets the light pass further into the eye. The pupil is essentially what we refer to as aperture in photography. The amount of light that enters the retina (which works just like the camera sensor), is limited to the size of the pupil - the larger the pupil, the more light enters the retina.
Simply put, aperture is a hole within a lens, through which light travels into the camera body. It is easier to understand the concept if you just think about our eyes. Every camera that we know of today is designed like human eyes. The cornea in our eyes is like the front element of a lens - it gathers all external light, then bends it and passes it to the iris. Depending on the amount of light, the iris can either expand or shrink, controlling the size of the pupil, which is a hole that lets the light pass further into the eye. The pupil is essentially what we refer to as aperture in photography. The amount of light that enters the retina (which works just like the camera sensor), is limited to the size of the pupil - the larger the pupil, the more light enters the retina.f/ ?
Flash:
LED
Features:
Autofocus
Slow Motion Video:
No, 30.0 fps
Resolution:
2 Mpx
Connectivity iNew I3000
3G:
2100, 850 MHz
2G:
1800, 1900, 850, 900 MHz
SIM:The standard SIM card is the original SIM and largest of the three. This SIM measures 25x15mm. The Micro SIM card is essentially a standard SIM card with the extra plastic around the circuit board trimmed off. Micro SIM cards measure 15x12mm. The Nano SIM card is the most recent type of SIM card which only measures 12.3x8.8mm.
The standard SIM card is the original SIM and largest of the three. This SIM measures 25x15mm. The Micro SIM card is essentially a standard SIM card with the extra plastic around the circuit board trimmed off. Micro SIM cards measure 15x12mm. The Nano SIM card is the most recent type of SIM card which only measures 12.3x8.8mm.Dual SIM Dual Standby (Unknown Unknown)
Wi-Fi standards:These standards were created by an organization known as the Wi-Fi Alliance, a trade association consisting of companies interested in promoting a common standard for wireless Internet connections. IEEE 802.11 - The original! Created in 1997, this now-defunct standard supported a blazing fast maximum connection speed of megabits per second. Devices using this haven't been made for over a decade and won't work with today's equipment. IEEE 802.11a - Created in 1999, this version of Wi-Fi works on the 5 GHz band. This was done with the hope of encountering less interference, since many devices (like most wireless phones) use the 2.4 GHz band as well. 802.11a is fairly quick too, with maximum data rates topping out at 54 megabits per second. However, the 5GHz frequency has more difficulty with objects that are in the signal's path, so the range is often poor. IEEE 802.11b - Also created in 1999, this standard uses the more typical 2.4 GHz band and can achieve a maximum speed of 11 megabits per second. 802.11b was the standard that kick-started Wi-Fi's popularity. IEEE 802.11g - Designed in 2003, the 802.11g standard upped the maximum data rate to 54 megabits per second while retaining usage of the reliable 2.4 GHz band. This resulted in widespread adoption of the standard. Wireless g remains common even today, as it is adequately fast and routers lacking support of the new n standard are incredibly cheap. IEEE 802.11n - The newest Wi-Fi standard, n was actually introduced in 2009. It's been adopted slowly, but it now common on routers and laptops. 802.11n can operate at both 2.4GHz and 5 GHz and it supports multi-channel usage. Each channel offers a maximum data rate of 150 megabits per second, which means the maximum data rate of the standard is 600 megabits per second. However, this requires hardware support, and I have yet to see a Wireless n router with more than three channels. The support must be on both ends as well, so you can't make use of a dual or tri-channel router if your laptop only supports a single channel.
These standards were created by an organization known as the Wi-Fi Alliance, a trade association consisting of companies interested in promoting a common standard for wireless Internet connections. IEEE 802.11 - The original! Created in 1997, this now-defunct standard supported a blazing fast maximum connection speed of megabits per second. Devices using this haven't been made for over a decade and won't work with today's equipment. IEEE 802.11a - Created in 1999, this version of Wi-Fi works on the 5 GHz band. This was done with the hope of encountering less interference, since many devices (like most wireless phones) use the 2.4 GHz band as well. 802.11a is fairly quick too, with maximum data rates topping out at 54 megabits per second. However, the 5GHz frequency has more difficulty with objects that are in the signal's path, so the range is often poor. IEEE 802.11b - Also created in 1999, this standard uses the more typical 2.4 GHz band and can achieve a maximum speed of 11 megabits per second. 802.11b was the standard that kick-started Wi-Fi's popularity. IEEE 802.11g - Designed in 2003, the 802.11g standard upped the maximum data rate to 54 megabits per second while retaining usage of the reliable 2.4 GHz band. This resulted in widespread adoption of the standard. Wireless g remains common even today, as it is adequately fast and routers lacking support of the new n standard are incredibly cheap. IEEE 802.11n - The newest Wi-Fi standard, n was actually introduced in 2009. It's been adopted slowly, but it now common on routers and laptops. 802.11n can operate at both 2.4GHz and 5 GHz and it supports multi-channel usage. Each channel offers a maximum data rate of 150 megabits per second, which means the maximum data rate of the standard is 600 megabits per second. However, this requires hardware support, and I have yet to see a Wireless n router with more than three channels. The support must be on both ends as well, so you can't make use of a dual or tri-channel router if your laptop only supports a single channel.802.11b, 802.11g, 802.11n
Bluetooth:Bluetooth is a global wireless communication standard that connects devices together over a certain distance. A Bluetooth device uses radio waves instead of wires or cables to connect to a phone or computer. A Bluetooth product, like a headset or watch, contains a tiny computer chip with a Bluetooth radio and software that makes it easy to connect. When two Bluetooth devices want to talk to each other, they need to pair. Communication between Bluetooth devices happens over short-range, ad hoc networks known as piconets. A piconet is a network of devices connected using Bluetooth technology. The network ranges from two to eight connected devices. When a network is established, one device takes the role of the master while all the other devices act as slaves.
Bluetooth is a global wireless communication standard that connects devices together over a certain distance. A Bluetooth device uses radio waves instead of wires or cables to connect to a phone or computer. A Bluetooth product, like a headset or watch, contains a tiny computer chip with a Bluetooth radio and software that makes it easy to connect. When two Bluetooth devices want to talk to each other, they need to pair. Communication between Bluetooth devices happens over short-range, ad hoc networks known as piconets. A piconet is a network of devices connected using Bluetooth technology. The network ranges from two to eight connected devices. When a network is established, one device takes the role of the master while all the other devices act as slaves.v4.0
Profiles:
GPS:The Global Positioning System (GPS) is a space-based navigation system that provides location and time information in all weather conditions, anywhere on or near the Earth where there is an unobstructed line of sight to four or more GPS satellites.
The Global Positioning System (GPS) is a space-based navigation system that provides location and time information in all weather conditions, anywhere on or near the Earth where there is an unobstructed line of sight to four or more GPS satellites.with A-GPS, GPS
USB charging:
Yes
USB Mass Storage:
Yes
Audio Jack:
Yes
Computer sync:
Yes
OTA sync:
Yes
Radio FM:
Yes
Battery iNew I3000
Capacity:
2500 mAh
Type:
Li-Polymer
Others:
Removable
Comments, questions and answers to iNew I3000
Ask a question about iNew I3000
