You want to update the firmware, as it does not suit you in terms of functionality.
Where can I find the firmware?
On the official website of the manufacturer.
On sites where developers post custom or official OS.
What should be done before installing the firmware?
Create a backup copy of user data, contacts and photos and transfer it to your computer.
Insert SD card. An SD card is needed to write firmware to it.
Determine your smartphone model.
Charge your phone fully. If the battery runs out during boot, the device will no longer turn on. It will be difficult to restore it.
Download archive with Firmware. Place it on the SD card.
Installing TWRP Recovery
Install the Official TWRP App from the Play Store on your phone.
When you start the application for the first time, you must agree to install the firmware, as well as agree to grant the application Superuser rights and click the 'OK' button.
In the next screen, select the item 'TWRP FLASH' and provide the application with root-rights.
On the main screen of the application, click 'Select Device', and find your phone model.
After selecting the phone, the program will redirect the user to a web page to download the corresponding image file of the modified recovery environment. Download the proposed *.img file.
After downloading the image file, return to the main screen of the Official TWRP App and press the 'Select a file to flash' button. Select the file downloaded in the previous step.
Press the 'FLASH TO RECOVERY' button and confirm your choice.
When the message 'Flash Completed Succsessfuly!' appears. Click 'OK'. The TWRP installation procedure is now complete.
Write the firmware to the SD card. Using a PC or laptop card reader.
Insert a memory card into your phone.
To reboot into recovery, you need to enter the menu accessible by pressing the button with three stripes in the upper left corner of the main screen of the application. Select the 'Reboot' item, and then click on the 'REBOOT RECOVERY' button. The phone will reboot into the recovery environment automatically..
Firmware via TWRP
Before flashing, you need to delete all user data from the phone, this will avoid many problems. press 'WIPE' on the home screen.
You can start flashing. Click the 'Install' button.
The file selection screen is displayed. At the very top is the 'Storage' button, which allows you to switch between types of memory.
Select the location where the files were copied. Press the 'OK' button.
Select the firmware file and click on it. A screen opens with a warning about possible negative consequences, you need to check the item 'Zip signature verification', which will avoid using corrupted files when writing to the phone's memory sections.
The procedure for flashing the phone will begin, accompanied by the appearance of inscriptions in the log field and the movement of the progress bar.
When the procedure for installing the firmware is completed, the message 'Successful' appears on the screen.
Summary: OS: Android 4.4 KitKat; CPU Speed: 1.7 GHz; Primary display: SUPER AMOLED 5" 1920 x 1080 pixels 16M colors FHD, 441 ppi, Corning Gorilla Glass 3; Secondary display: No; RAM: 2 GB; Internal memory: 16 GB; Memory Card: MicroSD, Up to 32 GB; Primary camera: 13 MP 4128 x 3096 pixels LED flash; Secondary camera: 5 MP 2592 x 1944 pixels; Headphone: Yes 3.5mm; WI-FI: Yes 802.11 b/g/n 1; NFC: No; GPS: Yes A-GPS; Bluetooth: No; HDMI: No; Hotknot: No; USB: Yes Micro-USB 2.0; Infrared: No; Waterproof: No; Dustproof: No; Shock resistant: No; Sensors: Accelerometer, Proximity, Light, Gravity, Gyroscope; Capacity: 2300 mAh Li-Po; Dimension: 145 x 71 x 5.5 mm; Weight: 130 g; SIM: Micro-SIM, Single-SIM; Co ...
Comments, questions and answers on the flash firmware Condor C8S