Supermicro MBD-X7DVL-L-O specs
Motherboards Specs >> Supermicro >> Supermicro MBD-X7DVL-L-O
Processor & Chipset Supermicro MBD-X7DVL-L-O
Chipset Manufacturer:
Intel
Total Processor Supported:
2
Processor Technology:
Hyper-Threading Technology
Processor Socket:
Socket J LGA-771
Processor Supported:
Xeon
Front Side Bus:
1333 MHz, 1066 MHz, 667 MHz
Memory Supermicro MBD-X7DVL-L-O
Number of Memory Slots:
4
Maximum Memory:
16 GB
Memory Standard:
DDR2-667/PC2-5300, DDR2-533/PC2-4200
Memory Technology:
DDR2 SDRAM
Memory Speed Supported:
667 MHz, 533 MHz
I/O Controller Supermicro MBD-X7DVL-L-O
Controller Type:
Floppy Controller, Serial ATA/300, Ultra ATA/100 (ATA-6)
Video Supermicro MBD-X7DVL-L-O
Onboard Video:
On-board Video Chipset
Graphics Controller Manufacturer:
XGI
Graphics Controller Model:
Volari Z7
Graphics Controller Memory:
16 MB
Network & Communication Supermicro MBD-X7DVL-L-O
Gigabit Ethernet:
Yes
I/O Expansions Supermicro MBD-X7DVL-L-O
Number of Total Expansion Slots:
2
Number of PCI Slots:
1
Total Number of PCI Express Slots:
1
Number of PCI Express x8 Slots:
1
Interfaces/Ports Supermicro MBD-X7DVL-L-O
Total Number of USB Ports:
2
Number of USB 2.0 Ports:
2
Serial Port:
Yes
VGA:
Video Graphics ArrayYes
Network (RJ-45):
Yes
Onboard Interfaces Supermicro MBD-X7DVL-L-O
Number of IDE Interfaces:
1
Number of SATA Interfaces:
4
Total Number of Onboard USB Ports:
1
Onboard LEDs Header:
Yes
Physical Characteristics Supermicro MBD-X7DVL-L-O
Width:
9.60" (243.84 mm)
Depth:
10" (254 mm)
Miscellaneous Supermicro MBD-X7DVL-L-O
Package Contents:
1 x X7DVL-L Server Board, 1 x Motherboard Manual for X7DVL-L, 1 x ATX Floppy Cable, 1 x ATA 66/100 IDE LP Cable, 4 x 2ft. Amphenol, SATA Cable, 1 x Version 1.10 CD or later, 1 x Motherboard I/O Shield, 1 x CPU Retention Module,
Additional Information:
ROHS Compliant, Dual Channel memory supported,
Chipsets:
Intel 5000V (Blackford VS), MCH, ESB2,
BIOS Features:
8Mb Flash EEPROM with Phoenix BIOS, Plug and Play (PnP), SMBIOS 2.3, DMI 2.3, PCI 2.2, ACPI 1.0, USB Keyboard support, Hardware BIOS Virus protection,
Support CD Contents:
BIOS flash upgrade utility, Device drivers,
Hardware Monitoring:
Monitors for CPU Cores, 1.8V, 3.3V, 5V, ±12V, 3.3V Standby, 5V Standby, VBAT, 4-Phase-switching voltage regulator, Total of five 4-pin and 3-pin fan headers supporting up to 5 fans, 5x fans with tachometer status monitoring, Status monitor for speed control, Status monitor for on/off control, Support 3-pin fans (w/o speed control), Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Control for 5x fan connectors, PSU I2C temperature sensing logic, Thermal Monitor 2 (TM2) support, CPU / System Overheat LED, Suspend-state indicator LED, 5V Standby alert LED, Chassis intrusion detection, Chassis intrusion header, SDDC Support, Onboard voltage monitors for CPU cores, 1.8V, 3.3V, 5V, 12V, 12V, 3.3V standby, 5V standby and VBAT, Fan status monitor with firmware control, CPU/chassis temperature monitors, Low noise fan speed control, Platform Environment Control Interface (PECI) ready, CPU fan auto-off in sleep mode, Pulse Width Modulation (PWM) fan control, I2C temperature sensing logic, Thermal Monitor 2 (TM2) support, CPU slow-down on temperature overheat, CPU thermal trip support for processor protection, Power-up mode control for recovery from AC power loss, Chassis intrusion detection, System resource alert via Supero Doctor III,
ACPI Features:
Slow blinking LED for suspend state indicator, Main switch override mechanism, ACPI Power Management, Power-on mode for power recovery,
Reviews, Questions about Supermicro MBD-X7DVL-L-O
Write Review / Ask a question about Supermicro MBD-X7DVL-L-O