Supermicro MBD-X7DBN-O specs
Motherboards Specs >> Supermicro >> Supermicro MBD-X7DBN-O
Processor & Chipset Supermicro MBD-X7DBN-O
Chipset Manufacturer:
Intel
Total Processor Supported:
2
Processor Technology:
Hyper-Threading Technology
Processor Socket:
Socket J LGA-771
Processor Supported:
Xeon
Front Side Bus:
1333 MHz, 1066 MHz, 667 MHz
Memory Supermicro MBD-X7DBN-O
Number of Memory Slots:
8
Maximum Memory:
32 GB
Memory Standard:
DDR2-667/PC2-5300, DDR2-533/PC2-4200
Memory Technology:
DDR2 SDRAM
Memory Speed Supported:
667 MHz, 533 MHz
I/O Controller Supermicro MBD-X7DBN-O
Controller Type:
Floppy Controller, Serial ATA/300, Ultra ATA/133 (ATA-7)
Video Supermicro MBD-X7DBN-O
Onboard Video:
On-board Video Chipset
Graphics Controller Manufacturer:
ATI
Graphics Controller Model:
ES1000
Graphics Controller Memory:
16 MB
Network & Communication Supermicro MBD-X7DBN-O
Gigabit Ethernet:
Yes
I/O Expansions Supermicro MBD-X7DBN-O
Number of Total Expansion Slots:
6
Number of PCI Slots:
1
Number of PCI-X Slots:
2
Total Number of PCI Express Slots:
3
Number of PCI Express x4 Slots:
1
Number of PCI Express x8 Slots:
2
Interfaces/Ports Supermicro MBD-X7DBN-O
Total Number of USB Ports:
2
Number of USB 2.0 Ports:
2
Parallel Port:
Yes
Serial Port:
Yes
VGA:
Video Graphics ArrayYes
Network (RJ-45):
Yes
Onboard Interfaces Supermicro MBD-X7DBN-O
Number of IDE Interfaces:
2
Number of SATA Interfaces:
6
Total Number of Onboard USB Ports:
3
Onboard LEDs Header:
Yes
Physical Characteristics Supermicro MBD-X7DBN-O
Width:
12" (304.80 mm)
Depth:
13" (330.20 mm)
Miscellaneous Supermicro MBD-X7DBN-O
Package Contents:
1 x X7DBN Server Board, 1 x Motherboard Manual for X7DBN, 1 x 9-pin Serial Port Cable, 1 x ATX Floppy Cable, 1 x USB 2.0 2-Port Cable w/Key, 1 x ATA 66/100 IDE LP Cable, 6 x 2ft. Amphenol, SATA Cable, 1 x Version 1.10 CD or later, 1 x Motherboard I/O Shield,
Additional Information:
ROHS Compliant
Chipsets:
5000P (Blackford), MCH, ESB2,
Hardware Monitoring:
Onboard voltage monitors for CPU cores, chipset voltage, 3.3V, 5V, 12V, 12V, 3.3V standby, 5V standby and VBAT, Fan status monitor with firmware control, CPU/chassis temperature monitors, Platform Environment Control Interface (PECI) ready, CPU fan auto-off in sleep mode, CPU slow-down on temperature overheat, CPU thermal trip support for processor protection, power LED, Power-up mode control for recovery from AC power loss, Auto-switching voltage regulator for CPU cores, System overheat/Fan Fail LED Indicator and control, Chassis intrusion detection, System resource alert via Supero Doctor III, 8x fans with tachometer status monitoring, Status monitor for speed control, Status monitor for on/off control, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Control for 8x fan connectors, PSU I2C temperature sensing logic, Thermal Monitor 2 (TM2) support, Chassis intrusion header, SDDC Support,
ACPI Features:
Slow blinking LED for suspend state indicator, Main switch override mechanism, ACPI/ACPM Power Management, Keyboard Wakeup from Soft-off,
Support CD Contents:
BIOS flash upgrade utility, Device drivers,
Reviews, Questions about Supermicro MBD-X7DBN-O
Write Review / Ask a question about Supermicro MBD-X7DBN-O