Supermicro MBD-PDSME-O specs
Motherboards Specs >> Supermicro >> Supermicro MBD-PDSME-O
Processor & Chipset Supermicro MBD-PDSME-O
Chipset Manufacturer:
Intel
Total Processor Supported:
1
Processor Technology:
Hyper-Threading Technology
Processor Socket:
Socket T LGA-775
Processor Supported:
Pentium 4 (Extreme Edition), Pentium 4, Pentium D, Celeron D
Front Side Bus:
533 MHz, 800 MHz, 1066 MHz
Memory Supermicro MBD-PDSME-O
Number of Memory Slots:
4
Maximum Memory:
8 GB
Memory Standard:
DDR2-400/PC2-3200, DDR2-533/PC2-4200, DDR2-667/PC2-5300
Memory Technology:
DDR2 SDRAM
Memory Speed Supported:
667 MHz, 533 MHz, 400 MHz
I/O Controller Supermicro MBD-PDSME-O
Controller Type:
Floppy Controller, Serial ATA/300, Ultra ATA/100 (ATA-6)
Video Supermicro MBD-PDSME-O
Onboard Video:
On-board Video Chipset
Graphics Controller Manufacturer:
ATI
Graphics Controller Model:
Rage-XL
Graphics Controller Memory:
8 MB
Network & Communication Supermicro MBD-PDSME-O
Gigabit Ethernet:
Yes
I/O Expansions Supermicro MBD-PDSME-O
Number of Total Expansion Slots:
5
Number of PCI-X Slots:
4
Total Number of PCI Express Slots:
1
Number of PCI Express x4 Slots:
1
Interfaces/Ports Supermicro MBD-PDSME-O
Total Number of USB Ports:
2
Number of USB 2.0 Ports:
2
Serial Port:
Yes
VGA:
Video Graphics ArrayYes
Network (RJ-45):
Yes
Onboard Interfaces Supermicro MBD-PDSME-O
Number of IDE Interfaces:
1
Number of SATA Interfaces:
4
Total Number of Onboard USB Ports:
2
Onboard LEDs Header:
Yes
Physical Characteristics Supermicro MBD-PDSME-O
Width:
12" (304.80 mm)
Depth:
9.60" (243.84 mm)
Miscellaneous Supermicro MBD-PDSME-O
Package Contents:
1 x PDSME Motherboard, 1 x Manual for PDSME, 1 x ATX Floppy Cable, 1 x ATA 66/100 IDE LP Cable, 4 x SATA Cable (2 Ft.), 1 x Version 1.02 (or newer) CD, 1 x I/O Shield for PDSME,
Additional Information:
Chipset:
The Intel E7230 Chipset consists of the following components:, Memory Controller Hub (MCH), I/O Controller (ICH7R), PCI-X (PXH),
Memory Controller Hub (MCH):
Manages the data flow between four interfaces:, CPU interface, DDR2 System Memory Interface, PCI Express Interface, Direct Media Interface (DMI),
I/O Controller (ICH7R):
Provides the data buffering and interface arbitration required for the system to operate efficiently, Also provides the bandwidth needed for the system to maintain its peak performance, Supports PCI-E devices, four Serial ATA ports, six USB 2.0 ports and two IDE devices,
BIOS Features:
Plug and Play (P n P), DMI 2.3 support, PCI 2.2, ACPI 1.0, Hardware BIOS Virus protection, SMBIOS 2.3, USB Keyboard support,
Note:For a general system, a 450W (minimum) ATX12V power supply [8-pin 12V AND 24-pin is recommended to assure system stability]
Reviews, Questions about Supermicro MBD-PDSME-O
Write Review / Ask a question about Supermicro MBD-PDSME-O