Gigabyte GA-Z270-HD3 LGA 1151 specs
Motherboards Specs >> GIGABYTE >> Gigabyte GA-Z270-HD3 LGA 1151
Basic Specs Gigabyte GA-Z270-HD3 LGA 1151
CPU:
Support for 7th and 6th generation Intel Core i7, i5, Pentium, and Celeron processors in the LGA 1151 package
Chipset:
Intel Z270 Express Chipset
Memory:
4 x DDR4 DIMM sockets supporting up to 64 GB of system memory
Dual channel memory architecture
Support for DDR4 3866 (OC), 3800 (OC), 3733 (OC), 3666 (OC), 3600 (OC), 3466 (OC), 3400 (OC), 3333 (OC), 3300 (OC), 3200 (OC), 3000 (OC), 2800 (OC), 2666 (OC), 2400 (OC), and 2133 MHz memory modules
Support for ECC unbuffered DIMM 1Rx8/2Rx8 memory modules (operates in non-ECC mode)
Support for non-ECC unbuffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
Support for Extreme Memory Profile (XMP) memory modules
Onboard Graphics:
1 x VGA (D-Sub) port, supporting a maximum resolution of 1920 x 1200 @ 60 Hz
1 x DVI-D port, supporting a maximum resolution of 1920 x 1200 @ 60 Hz (VGA connection by adapter is not supported)
1 x HDMI 1.4 port, supporting a maximum resolution of 4096 x 2160 @ 24 Hz
Support for up to three simultaneous displays
Maximum shared memory of 1 GB
Audio:
Realtek ALC887 codec
Support for Sound Blaster X-Fi MB5
TI NE5532 operational amplifier
High Definition Audio
2/4/5.1/7.1-channel
Support for S/PDIF Out
LAN:
Intel GbE LAN chip (10/100/1000 Mb/s)
Expansion Slots:
1 x PCI Express 3.0 x16 slot, running at x16
2 x PCI Express 3.0 x16 slots, running at x4
2 x PCI Express 3.0 x1 slots
1 x PCI slot
Multi-Graphics Technology:
Support for NVIDIA Quad-GPU SLI and 2-Way NVIDIA SLI technologies
Support for AMD Quad-GPU CrossFireX and 3-Way/2-Way AMD CrossFire technologies
Storage Interface:
1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe x4/x2 SSD support)
1 x SATA Express connector
6 x SATA III 6 Gb/s connectors
Support for RAID 0, 1, 5, and 10
USB:
Universal Serial Bus8 x USB 3.0 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
Internal I/O Connectors:
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12 V power connector
1 x CPU fan header
3 x system fan headers
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
1 x Trusted Platform Module (TPM) header
1 x Serial port header
1 x Parallel port header
1 x Clear CMOS jumper
Back Panel Connectors:
1 x PS/2 keyboard/mouse port
1 x RJ45 Gigabit Ethernet port
6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In, Line Out, Mic In)
I/O Controller:
iTE I/O Controller Chip
H/W Monitoring:
Voltage detection
Temperature detection
Fan speed detection
Overheating warning
Fan fail warning
Fan speed control
BIOS:
2 x 64 Mbit flash
Use of licensed AMI UEFI BIOS
Support for DualBIOS
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Operating System:
Windows 10 (64-bit) for 7th Generation Intel Processors
Windows 10 (64-bit, 8.1 (64-bit), and 7 (32/64-bit) for 6th Generation Intel Processors
Form Factor:
ATX Form Factor; 12.0 x 8.9" / 30.5 x 22.5 cm
Reviews, Questions about Gigabyte GA-Z270-HD3 LGA 1151
Write Review / Ask a question about Gigabyte GA-Z270-HD3 LGA 1151