Canon PowerShot SX410 IS - error codes and error messages.
Digital cameras Specs >> Canon >> Canon PowerShot SX410 IS Specs| Specifications | | | Reviews | | | Error codes |
Canon PowerShot S100
E01, E02 Autofocus error (AF time out).
E03 Auto Exposure Error (AE time out).
E06 (TG fatal).
E09 (JPEG DMA Time Out).
E18 Lens Error (Zoom Lens Error).
E22 Cache Error.
E23 The memory card is full (CF Full).
E24 Power Management Error, a diagram of the camera's power converter.
E25 Focal lens drive error.
E26 Recording a still image to SDRAM (camera's RAM) is not completed at the (preset) specified time.
E27 Buffer Timeout
E30 Power supply is lost when data is being written to the memory card.
E50 Format memory card error (CF Format Error)
E51 Error accessing the memory card
E52 Error while displaying the image on the display
Canon PowerShot A10, A20, S110, S300.
E02 AF time out error.
The focus lens drive does not work.
E03 Auto Exposure Error (AE time out).
Failure of the automatic flash control circuit
E09 The communication process is not complete or has failed while processing JPEG images
E18 Lens Error (Zoom Lens Error).
E23 The memory card is full. This error occurs when there is not enough free space on the memory card at the time of recording and the recording process can not be completed even after trying to compress the image data.
E24 The supply voltage to the image processing chip was not detected.
E25 No signal from the optical sensor of the focusing lens
E26 The process of recording a still image in SDRAM (camera's RAM) is not complete.
E27 Error writing data to the memory card (CF write time over)
A message may indicate that there is not enough free space in the buffer in burst mode.
E30 Error while turning off the camera (Power off error)
The camera is turned off when the process of writing data to the memory card is not completed. (Error appears on the display the next time the camera is turned on).
* The code can be output after error E23
E50 CF memory card is not formatted (CF format error)
E52 Error of displaying a photo for preview (quick review error)
Canon PowerShot A30, A40, A60, A70, S200, S230, S330, S400, SD100
E02 AF time out error.
E03 Auto Exposure Error (AE time out).
E09 (JPEG DMA Time Out).
E14 Error that the camera's self-diagnosis system can not recognize.
E16 Failure to communicate with the CPU and peripheral devices at the time of recording or after the end of the image.
E18 Lens Error (Zoom Lens Error).
E22 Cache Error.
E23 The memory card is full (CF Full).
E24 Power Management Error, a diagram of the camera's power converter.
E25 Focal lens drive error.
E26 Recording a still image to SDRAM (camera's RAM) is not completed at the (preset) specified time.
E27 Buffer Timeout
E30 Power supply is lost when data is being written to the memory card.
E50 Format memory card error (CF Format Error)
E51 Error access to memory card (CF access error). Image data can not be read from the memory card.
E52 Error while displaying the image on the display
Canon PowerShot S30, S40, S45, S50
E02 AF time out error.
The focus lens drive does not work.
E03 Auto Exposure Error (AE time out).
Failure of the automatic flash control circuit
E09 The communication process is not complete or has failed while processing JPEG images
E14 Error that the camera's self-diagnosis system can not recognize.
E16 Failure to communicate with the CPU and peripheral devices at the time of recording or after the end of the image.
E18 Lens Error (Zoom Lens Error).
E23 The memory card is full. This error occurs when there is not enough free space on the memory card at the time of recording and the recording process can not be completed even after trying to compress the image data.
E24 The supply voltage to the image processing chip was not detected.
E25 No signal from the optical sensor of the focusing lens
E26 The process of recording a still image in SDRAM (camera's RAM) is not complete.
E27 Error writing data to the memory card (CF write time over)
A message may indicate that there is not enough free space in the buffer in burst mode.
E30 Error while turning off the camera (Power off error)
The camera is turned off when the process of writing data to the memory card is not completed. (Error appears on the display the next time the camera is turned on).
* The code can be output after error E23
E50 CF memory card is not formatted (CF format error)
E52 Error of displaying a photo for preview (quick review error)
Canon PowerShot A100, A200, A300
E02 AF time out error.
The focus lens drive does not work.
E03 Auto Exposure Error (AE time out).
Failure of the automatic flash control circuit
E09 The communication process is not complete or has failed while processing JPEG images
E14 Error that the camera's self-diagnosis system can not recognize.
E16 Failure to communicate with the CPU and peripheral devices at the time of recording or after the end of the image.
E18 Lens Error (Zoom Lens Error).
E22 Cache Error.
E23 The memory card is full (CF Full).
E24 Power Management Error, a diagram of the camera's power converter.
E25 Focal lens drive error.
E26 Recording a still image to SDRAM (camera's RAM) is not completed at the (preset) specified time.
E27 Buffer Timeout
E30 Power supply is lost when data is being written to the memory card.
E50 Format memory card error (CF Format Error)
E51 Error access to memory card (CF access error). Image data can not be read from the memory card.
E52 Error while displaying the image on the display
Canon PowerShot S30, S40, S45, S50
E02 AF time out error.
The focus lens drive does not work.
E03 Auto Exposure Error (AE time out).
Failure of the automatic flash control circuit
E09 The communication process is not complete or has failed while processing JPEG images
E14 Error that the camera's self-diagnosis system can not recognize.
E16 Failure to communicate with the CPU and peripheral devices at the time of recording or after the end of the image.
E18 Lens Error (Zoom Lens Error).
E23 The memory card is full. This error occurs when there is not enough free space on the memory card at the time of recording and the recording process can not be completed even after trying to compress the image data.
E24 The supply voltage to the image processing chip was not detected.
E25 No signal from the optical sensor of the focusing lens
E26 The process of recording a still image in SDRAM (camera's RAM) is not complete.
E27 Error writing data to the memory card (CF write time over)
A message may indicate that there is not enough free space in the buffer in burst mode.
E30 Error while turning off the camera (Power off error)
The camera is turned off when the process of writing data to the memory card is not completed. (Error appears on the display the next time the camera is turned on).
* The code can be output after error E23
E50 CF memory card is not formatted (CF format error)
E52 Error of displaying a photo for preview (quick review error)
Canon PowerShot A100, A200, A300
E02 AF time out error.
The focus lens drive does not work.
E03 Auto Exposure Error (AE time out).
Failure of the automatic flash control circuit
E09 The communication process is not complete or has failed while processing JPEG images
E14 Error that the camera's self-diagnosis system can not recognize.
E16 Failure to communicate with the CPU and peripheral devices at the time of recording or after the end of the image.
E23 The memory card is full. This error occurs when there is not enough free space on the memory card at the time of recording and the recording process can not be completed even after trying to compress the image data.
E24 The supply voltage to the image processing chip was not detected.
E25 No signal from the optical sensor of the focusing lens
E26 The process of recording a still image in SDRAM (camera's RAM) is not complete.
E27 Error writing data to the memory card (CF write time over)
A message may indicate that there is not enough free space in the buffer in burst mode.
E30 Error while turning off the camera (Power off error)
The camera is turned off when the process of writing data to the memory card is not completed. (Error appears on the display the next time the camera is turned on).
* The code can be output after error E23
E50 CF memory card is not formatted (CF format error)
E51 Error access to memory card (CF access error). Image data can not be read from the memory card.
E52 Error of displaying a photo for preview (quick review error)
Canon PowerShot G1
E02 AF time out error.
The focus lens drive does not work.
E03 Auto Exposure Error (AE time out).
Failure of the automatic flash control circuit
E09 The communication process is not complete or has failed while processing JPEG images
E14 Error that the camera's self-diagnosis system can not recognize.
E16 Failure to communicate with the CPU and peripheral devices at the time of recording or after the end of the image.
LENS Lens Error (Zoom Lens Error).
E23 The memory card is full. This error occurs when there is not enough free space on the memory card at the time of recording and the recording process can not be completed even after trying to compress the image data.
E24 The supply voltage to the image processing chip was not detected.
No power is supplied to the display board.
E25 No signal from the optical sensor of the focusing lens
E26 The process of recording a still image in SDRAM (camera's RAM) is not complete.
E27 Error writing data to the memory card (CF write time over)
A message may indicate that there is not enough free space in the buffer in burst mode.
E30 Error while turning off the camera (Power off error)
The camera power was turned off when the process of writing data to the memory card was not completed. (Error appears on the display the next time the camera is turned on).
* The code can be output after error E23
E50 CF memory card is not formatted (CF format error)
E52 Error of displaying a photo for preview (quick review error)
Canon PowerShot G2, G3, G5.
E02 AF time out error.
The focus lens drive does not work.
E03 Auto Exposure Error (AE time out).
Failure of the automatic flash control circuit
E09 The communication process is not complete or has failed while processing JPEG images
E14 Error that the camera's self-diagnosis system can not recognize.
E16 Failure to communicate with the CPU and peripheral devices at the time of recording or after the end of the image.
LENS Lens Error (Zoom Lens Error).
E23 The memory card is full. This error occurs when there is not enough free space on the memory card at the time of recording and the recording process can not be completed even after trying to compress the image data.
E24 The supply voltage to the image processing chip was not detected.
No power is supplied to the display board.
E25 No signal from the optical sensor of the focusing lens
E26 The process of recording a still image in SDRAM (camera's RAM) is not complete.
E27 Error writing data to the memory card (CF write time over)
A message may indicate that there is not enough free space in the buffer in burst mode.
E30 Error while turning off the camera (Power off error)
The camera power was turned off when the process of writing data to the memory card was not completed. (Error appears on the display the next time the camera is turned on).
* The code can be output after error E23
E50 CF memory card is not formatted (CF format error)
E52 Error of displaying a photo for preview (quick review error)
Canon PowerShot Pro 90
E03 Auto Exposure Error (AE time out).
Failure of the automatic flash control circuit
E09 The communication process is not complete or has failed while processing JPEG images
E11 Communication between the CPU and the controller failed.
E16 Communication error between the CPU and peripheral devices failed at the time of image recording.
E18
LENS ERROR Lens Error (Zoom Lens Error).
E22 Cache Error.
E23 The memory card is full. This error occurs when there is not enough free space on the memory card at the time of recording and the recording process can not be completed even after trying to compress the image data.
E24 The supply voltage to the image processing chip was not detected.
No power is supplied to the display board.
E26 The process of recording a still image in SDRAM (camera's RAM) is not complete.
E27 Error writing data to the memory card (CF write time over)
A message may indicate that there is not enough free space in the buffer in burst mode.
E30 (Power off error)
The camera power was turned off when the process of writing data to the memory card was not completed. (Error appears on the display the next time the camera is turned on).
* The code can be output after error E23
E50 CF memory card is not formatted (CF format error)
E52 Error of displaying a photo for preview (quick review error)
Canon EOS 1D Mark II
Canon EOS 1Ds
Canon EOS 10D
Canon EOS 20D
Canon EOS 50D
Canon EOS 300D (Digital Rebel)
Canon EOS 600D and others.
Err 01 Communication (connection) between the camera and the lens is broken.
Err 02 An error occurs when the image data can not be written to the memory card.
Err 04 This error occurs when there is not enough space on the memory card to write a file - the memory card is full.
Err 05 This error occurs when the automatic flash lift mechanism is malfunctioning.
Err 06 Cleaning the sensor is not possible.
Err 10 There are issues with the files. Software failure
Err 20 Malfunction associated with the shutter mechanism.
Err 30 Fault in the mechanism of the mirror and shutter unit.
Err 40 Power failure
Err 50 Fault associated with electrical control, power monitor.
Err 70 Error related to CMOS sensor.
Err 80 A fault associated with the power converter, electrical control, or CMOS sensor.
Err 99 Other errors. Errors that the camera self-diagnosis system can not recognize.
Canon EOS 30D
Err 09 The camera self-diagnosis system could not identify the error for a specified period of time.
Err 22 An error occurs when the image data can not be written to the memory card.
Err 23 There is no free space on the memory card. This error is similar to err 04 (see above).
Err 50 Error in formatting CF memory card
Err 51 An error occurs when the image file recorded on the memory card can not be displayed on the camera.
Err 80 Malfunction of the shutter mechanism.
Err 81 Malfunction of the mirror mechanism.
Err 82 The built-in flash is malfunctioning.
Err 83 Malfunction of the built-in flash mechanism.
Err 84 Communication failure (connection) between the camera and the lens.
